SIP32411 datasheet(2/15 Pages) VISHAY

2 / 15 page

SiP32411

www.vishay.com

Vishay Siliconix

S20-0532-Rev. G, 06-Jul-2020

Document Number: 66710

For technical questions, contact: powerictechsupport@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

a. Device mounted with all leads and power pad soldered or welded to PC board, see PCB layout

b. Derate 4.5 mW/°C above TA = 70 °C, see PCB layout

c. Derate 5.9 mW/°C above TA = 70 °C, see PCB layout



Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation

of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum

rating/conditions for extended periods may affect device reliability.

ABSOLUTE MAXIMUM RATINGS

PARAMETER

LIMIT

UNIT

Supply input voltage (VIN)

-0.3 to 6

Enable input voltage (VEN)

-0.3 to 6

Output voltage (VOUT)

-0.3 to VIN +0.3

Maximum continuous switch current (Imax.)

SC-70-6 package

1.8

TDFN4 1.2 mm x 1.6 mm

2.4

Maximum pulsed current (IDM) VIN

(pulsed at 1 ms, 10 % duty cycle)

SC-70-6 package

2.2

TDFN4 1.2 mm x 1.6 mm

ESD rating (HBM)

4000

Junction temperature (TJ)

-40 to +125

°C

Thermal tesistance (



JA)

6 pin SC-70-6 b

240

°C/W

4 pin TDFN4 1.2 mm x 1.6 mm c

170

Power dissipation (PD) a

6 pin SC-70- 6 b

230

4 pin TDFN4 1.2 mm x 1.6 mm c

324

RECOMMENDED OPERATING RANGE

PARAMETER

LIMIT

UNIT

Input voltage range (VIN)

1.1 to 5.5

Operating temperature range

-40 to 85

°C

SIP32411 bảng dữ liệu(PDF) 2 Page - Vishay Siliconix

SIP32411 bảng dữ liệu(HTML) 2 Page - Vishay Siliconix

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

bảng dữ liệu tải về

Link URL