| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
USB7056 bảng dữ liệu(PDF) 31 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
USB7056 bảng dữ liệu(HTML) 31 Page - Microchip Technology |
|
31 / 55 page ![]() 2022 Microchip Technology Inc. and its subsidiaries DS00002675F-page 31 USB7056 8.0 FUNCTIONAL DESCRIPTIONS This section details various USB7056 functions, including: • Downstream Battery Charging • Port Power Control • Power Delivery • CC Pin Orientation and Detection • PortSplit • FlexConnect • USB to GPIO Bridging • USB to GPIO Bridging • USB to I2C Bridging • USB to SPI Bridging • Link Power Management (LPM) • Resets 8.1 Downstream Battery Charging The device can be configured by an OEM to have any of the downstream ports support battery charging. The hub’s role in battery charging is to provide acknowledgment to a device’s query as to whether the hub system supports USB battery charging. The hub silicon does not provide any current or power FETs or any additional circuitry to actually charge the device. Those components must be provided externally by the OEM. If the OEM provides an external supply capable of supplying current per the battery charging specification, the hub can be configured to indicate the presence of such a supply from the device. This indication, via the PRT_CTLx pins, is on a per port basis. For example, the OEM can configure two ports to support battery charging through high current power FETs and leave the other two ports as standard USB ports. The port control signals are assigned to programmable pins (PFx) and therefore the device must be programmed into specific configurations to enable the signals. Refer to Section 3.3.4, PF[31:3] Configuration (CFG_STRAP[2:1]) for addi- tional information. For detailed information on utilizing the battery charging feature, refer to the application note “USB Battery Charging with Microchip USB7002 and USB705x Hubs ”, which can be found on the Microchip USB7056 product page www.micro- chip.com/USB7056. Note: FlexConnect, Mini-host and MHB are not available in the USB7056. The firmware behavior for any of these commands is undefined. FIGURE 8-1: BATTERY CHARGING EXTERNAL POWER SUPPLY SOC VBUS[n] PRT_CTLx INT SCL SDA Microchip Hub DC Power |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |