Typical application circuit

Figure 11Typical Application Diagram

Transceivers are designed for bidirectional data communication on multi-point bus

transmission lines. Figure 6 shows a typical network application power Road These devices

can also be used as linear transponders with cable lengths longer than 4000 feet. In order to

reduce reflection, terminal matching should be performed at both ends of the transmission line

with their characteristic impedances, and the length of branch connections other than the trunk

line should be as short as possible.

SP3085

www.leiditech.com

Rev 1.6 :01.01.2022

8/10

Figure 10Typical Application Diagram