https://www.phoenixcontact.com/pi/products/2865340

02/04/2022   Page 1 / 15

Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I - 2865340

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Ex i repeater power supply and input signal conditioner, HART-transparent. Transmits supplied or active 0/4

… 20 mA signals from the Ex area to a load (active or passive) in the safe area. 3-way electrical isolation,

SIL 2 in accordance with IEC 61508, with screw connection

Your advantages

 0/4 mA ... 20 mA input, intrinsically safe, [Ex ia], powered and not powered

 Measuring transducer supply voltage > 16 V

 0/4 mA ... 20 mA output, active up to 1000 Ω load or passive

 Bidirectional HART signal transmission

 Error indication according to NAMUR NE 43

 SIL 2 according to IEC 61508/EN 61508

 Installation in zone 2, protection type "ec" (EN 60079-7) permitted

 3-way electrical isolation

 Power supply possible via DIN rail connector

 Plug-in connection terminal blocks, screw connection technology, with integrated sockets for HART communicators

 Housing width: 12.5 mm

 Minimal power dissipation

 High transmission accuracy

Key Commercial Data

Packing unit

1 pc

GTIN

GTIN

4046356160353

Technical data

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download

area

Dimensions