| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM8S903K3 bảng dữ liệu(PDF) 52 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM8S903K3 bảng dữ liệu(HTML) 52 Page - STMicroelectronics |
|
52 / 124 page ![]() Electrical characteristics STM8S903K3 STM8S903F3 52/124 DocID15590 Rev 12 Figure 9. Pin input voltage 10.2 Absolute maximum ratings Stresses above the absolute maximum ratings listed in Table 18: Voltage characteristics, Table 19: Current characteristics and Table 20: Thermal characteristics may cause permanent damage to the device. These are stress ratings only and a functional operation of the device at these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect the device’s reliability. The device’s mission profile (application conditions) is compliant with the JEDEC JESD47 Qualification Standard, the extended mission profiles are available on demand. Table 18. Voltage characteristics Symbol Ratings Min Max Unit VDDx - VSS Supply voltage (including VDDA and VDDIO)(1) 1. All power (VDD) and ground (VSS) pins must always be connected to the external power supply -0.3 6.5 V VIN Input voltage on true open drain pins(2) 2. This pin must never be exceeded. This is implicitly insured if VIN maximum is respected. If VIN maximum cannot be respected, the injection current must be limited externally to the IINJ(PIN) value. A positive injection is induced by VIN > VDD while a negative injection is induced by VIN < VSS. For true open-drain pads, there is no positive injection current, and the corresponding VIN maximum must always be respected VSS - 0.3 6.5 V Input voltage on any other pin(2) VSS - 0.3 VDD + 0.3 |VDDx - VDD| Variations between different power pins - 50 mV |VSSx - VSS| Variations between all the different ground pins - 50 VESD Electrostatic discharge voltage see Absolute maximum ratings (electrical sensitivity) on page 88 Table 19. Current characteristics Symbol Ratings Max.(1) Unit IVDD Total current into VDD power lines (source)(2) 100 mA IVSS Total current out of VSS ground lines (sink)(1) 80 IIO Output current sunk by any I/O and control pin 20 Output current source by any I/Os and control pin -20 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |