For further information contact your local STMicroelectronics sales office.

August 2018

DB2005 Rev 3

1/4

1

SPC56L-Discovery

SPC56EL70L5DISP: Discovery+ evaluation board

Data brief

Features

 Board Supply: Single 12 VDC external power

supply input. Two regulators provide power

voltages 5 V and 3.3 V.

 Main power switch and three power supply

status LEDs (+12 V, +5 V and +3.3 V)

 All MCU signals accessible by a 37 x 4 100 mil

pin grid array allowing connection of an

additional board for dedicated applications.

 JTAG interface (7 x 2 male 100 mil connector)

 Two FlexRay channels with jumper enable and

DB9 male connector.

 Two CAN channels with jumper enable and

DB9 male connector

 K-Line interface.

 Two LIN interfaces (HW configurable)

 Two potentiometers for analog voltage input

 Three user LEDs.

 40 MHz crystal.

 Reset push button.

 Specification:

– Board size 115 x 135mm

– 12 VDC center positive, 2.1 mm inner

diameter.

Description

The SPC56xL Discovery+ kit helps you to

Microcontrollers with full access to CPUs, I/O

signals and peripherals such as CAN, UART,

FlexRay, JTAG, K-Line, LIN at budget price.

Free ready-to-run application firmware examples

to support quick evaluation and development.

SPC5studio includes visual configurable code

generation engine, board support package (BSP),

startup routines, interrupt services, free RTOS

(optional) and a full set of low level drivers.

SPC5Studio includes Hightec GNU "C" compiler,

with a 30-days full free trial license. SPC5Studio

is available for free download.

The SPC56xL family is designed to address all

Automotive Applications but as well industrial

safety oriented applications.

The SPC56xL devices featured specific functions

to make the design of ASIL D/SIL-3 applications

easier.

An E2E Community is available on ST WEB:

Table 1. Device summary

Order code

Reference

SPC56EL70L5DISP

SPC56xL DISCOVERY+

with SPC56EL70L5

www.st.com