A:

1.18 in. min.

B:

1.57 in. min.

General Tolerances of the Panel and Printed Circuit Board

The cumulative tolerance must not exceed 0.3 mm / 0.012 in.: T1 + T2 = 0.3 mm max.

Installation Precautions

● Minimum thickness of circuit board: 1.6 mm / 0.06 in.

● Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004

● Tightening torque of screws ZBZ006: 0.6 N.m (5.3 lbf.in) max.

● Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws:

○ every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).

○ with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•).

The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.

(1)

Head ZB5AD•

(2)

Panel

(2)

Nut

(4)

Printed circuit board

Mounting of Adapter (Socket) ZBZ01•

● 1 2 elongated holes for ZBZ006 screw access

● 2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ01•

● 3 8 × Ø 1.2 mm / 0.05 in. holes

● 4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)

● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)

● 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ01•

Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ01•.

Mar 7, 2022

7