SSD1821 datasheet(11/43 Pages) ETC1

tên linh kiện	SSD1821

Giải thích chi tiết về linh kiện	LCD Segment / Common Driver with Controller CMOS

PDF	43 Pages

Scroll/Zoom	100%

nhà sản xuất	ETC1 [List of Unclassifed Manufacturers]

Trang chủ

Logo

11 / 43 page

SOLOMON

SSD1820A/21

REV 1.4

01/03

VL5, VL4, VL3 and VL2

LCD driving voltages. They can be supplied externally or gener-

ated by the internal bias divider. They have the following relation-

ship:

VL6 > VL5 > VL4 > VL3 > VL2 > VSS

For SSD1820A, a equals to 9 at POR.

For SSD1821, a equal to 10 at POR.

COM0 - COM63/COM79

These pins provide the row driving signal COM0 - COM63/

COM79 to the LCD panel. See Table 1 or 2 about the COM signal

mapping in different multiplex ratio N.

ICONS

This pin is the special icons line COM signal output.

SEG0 - SEG127

These pins provide the LCD column driving signal. Their voltage

level is VSS during sleep mode and standby mode.

This pin is the external clock input for the device which is

enabled by using an extended command. Under normal operation,

this pin should be left opened and internal oscillator will be used

after power on reset.

N/C

These No Connection pins should NOT be connected to any sig-

nal pins nor shorted together. They should be left open.

1:a bias

VL5

(a-1)/a*VL6

VL4

(a-2)/a*VL6

VL3

2/a*VL6

VL2

1/a*VL6

SSD1821 bảng dữ liệu(PDF) 11 Page - List of Unclassifed Manufacturers