



Raspberry Pi Enclosure - Black (RPi2, B+)

DEV-12 997 RO HS



images are CC BY-NC-SA 3.0



Description: The Raspberry Pi is THE new favorite of development platforms, so the

last thing that you’d want is for something bad to happen to it. Why not protect it with

one of these snazzy black plastic enclosures? These cases protect the RPi2 and

Model B+ from things like rogue wires that might short it out while still allowing full

access to the board as well as proper airflow to keep your new toy cool! Simply snap

the RPi into the bottom half of the enclosure, then snap the two sides together.

The enclosure provides slots to access the GPIO header, USB ports, Ethernet,

microSD card, HMDI, 3.5mm jack, and CSI connectors as well as rubber feet and

vents to ensure the board gets proper cooling and Pi Camera module mounting holes.

All of the status LEDs on the Pi are visible through the case thanks to tunnel recesses

embedded in the design and the two piece case can be taken apart without

unplugging any cables. This is a really slick case and once you’ve gotten your hands

on a Raspberry Pi, you’ll want to snag one of these to put it in!

Note: This case does NOT include a Raspberry Pi.

Dimensions: 93.4mm x 62.7mm x 31.1mm

11/16/2015

https://www.sparkfun.com/products/12997