Relay Expansion Board for Onion Omega

DEV-14444

Description

The Relay Expansion Board enables your Omega to control two other independent

electrical circuits. The circuits are isolated from the Omega and can operate at much

higher or lower voltages, so you can control other circuits you’ve built or small

household appliances rated up to 60W. The Relay Expansion Board is perfect for

home automation projects because it gives you the ability to control other devices

remotely using your Omega.

Each Relay Expansion Board features two electromechanical relays that can switch

up to 60W and are rated for a maximum current of 2A with a maximum voltage of

220VDC or 250VAC. The screw terminals allow you to connect a variety of different

cables, leads and wires. This expansion board also comes with a 3-bit address switch,

allowing you to use up to eight relays with a single Omega, meaning you can control

up to 16 devices with just one Omega!

The Onion Omega boards we carry are separated into three different categories:

category, meaning you will need an Omega Dock that is equipped with a 30-pin

 

Features



Number of Relays: 2



Relay Max Voltage: 250VAC



Relay Max Current: 2A



Relay Max Switching Power: 60W, 62.5VA



Relay Typical Switching Time: 1ms



Relay Max Switching Time: 3ms



30-pin Expansion Pins