Export Restrictions

This product has some level of export control/restriction, so may be delayed by

2-3 business days when shipping outside the United States. Contact us with

questions, or we will contact you after you place your order.

Teensy LC

DEV-13 305 RO HS



images are CC BY-NC-SA 3.0



Description: The Teensy is a breadboard-friendly development board with loads of

features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 bit

microcontroller board that provides you with an uncomplicated option for getting

started with the Teensy line of products without breaking the bank!

The Teensy LC comes pre-flashed with a bootloader so you can program it using the

on-board USB connection: No external programmer needed! You can program for the

Teensy in your favorite program editor using C or you can install the Teensyduino

add-on for the Arduino IDE and write Arduino sketches for Teensy!

The processor on the Teensy also has access to the USB and can emulate any kind

of USB device you need it to be, making it great for USB-MIDI and other HID projects.

The 32 bit processor brings a few other features to the table as well, such as multiple

channels of Direct Memory Access and an I2S digital audio interface! There are also

2 separate interval timers! Also, the Teensy LC can provide system voltage of 3.3V or

5V to other devices at up to 5-20mA.

All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1"

grid so you can slap it on a breadboard and get to work! So, what sets the Teensy LC

apart from the Teensy 3.1? First off, this version has been streamlined to be as cost

effective as possible. Obviously, the LC doesn’t share a lot of power that the 3.1

possesses but by no means does it make the LC a ‘weak’ board! The Teensy LC is

equipped with 8kB RAM, 62kB of flash memory, and 27 Digital I/O pins with 13 high

res Analog inputs.

Note: The Teensy LC does not come with a micro-B USB cable, please check the

Recommended Products section below for an appropriate one.

Dimensions: 1.4 x 0.7" (~35 x 18 mm)

Page 1 of 2