MIC5501 datasheet(3/22 Pages) MICROCHIP

3 / 22 page

 2019 Microchip Technology Inc.

DS20006006B-page 3

MIC5501/2/3/4

1.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings †

Supply Voltage (VIN) .................................................................................................................................... –0.3V to +6V

Enable Voltage (VEN) .................................................................................................................................... –0.3V to VIN

Power Dissipation (PD) ............................................................................................................. Internally Limited, Note 1

ESD Rating (Note 2) ..................................................................................................................................................3 kV

Operating Ratings ‡

Supply Voltage (VIN) ................................................................................................................................. +2.5V to +5.5V

Enable Voltage (VEN) ......................................................................................................................................... 0V to VIN

† Notice: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device.

This is a stress rating only and functional operation of the device at those or any other conditions above those indicated

in the operational sections of this specification is not intended. Exposure to maximum rating conditions for extended

periods may affect device reliability.

‡ Notice: The device is not guaranteed to function outside its operating ratings.

Note 1: The maximum allowable power dissipation of any TA (ambient temperature) is PD(max) = (TJ(max) – TA)/θJA.

Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the reg-

ulator will go into thermal shutdown.

2: Devices are ESD sensitive. Handling precautions are recommended. Human body model, 1.5 kΩ in series

with 100 pF.

ELECTRICAL CHARACTERISTICS

Electrical Characteristics: VIN = VEN = VOUT + 1V; CIN = COUT = 1 μF; IOUT = 100 μA; TJ = +25°C, bold values

indicate –40°C to +125°C, unless noted.

Parameter

Symbol

Min.

Typ.

Max.

Units

Conditions

Output Voltage Accuracy

VOUT

–2.0

—

2.0

Variation from nominal VOUT

–3.0

—

3.0

Variation from nominal VOUT;

–40°C to +125°C

Line Regulation

—

0.02

0.3

%/V

VIN = VOUT +1V to 5.5V; IOUT =

100 μA

Load Regulation (Note 1)

—

IOUT = 100 μA to 300 mA

Dropout Voltage (Note 2)

VDO

—

190

IOUT = 150 mA

—

160

380

IOUT = 300 mA

Ground Pin Current (Note 3)

IGND

—

μA

IOUT = 0 mA

—

IOUT = 300 mA

Ground Pin Current in

Shutdown

IGND(SHDN)

—

0.05

μA

VEN = 0V

Ripple Rejection

PSRR

—

f = 1 kHz; COUT = 1 μF

Current Limit

ILIM

400

630

900

VOUT = 0V

Output Voltage Noise

—

175

—

μVRMS COUT = 1 μF, 10 Hz to 100 kHz

Auto-Discharge NFET

Resistance

—

MIC5502, MIC5504 Only;

VEN = 0V; VIN = 3.6V; IOUT = –3 mA

Enable Input

Enable Pull-Down Resistor

—

MΩ

For MIC5503 and MIC5504 use

only

Enable Input Voltage

VEN

—

0.2

Logic-Low

1.2

—

Logic-High

MIC5501 bảng dữ liệu(PDF) 3 Page - Microchip Technology

MIC5501 bảng dữ liệu(HTML) 3 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

bảng dữ liệu tải về

Link URL