GLT52, GLT52-M Installation & Operating Instructions

GLT52, GLT53, GLT54, GLT52-M, GLT53-M, and GLT54-M are commercial designations of model numbers LPT52, LPT53, LPT54, LPT52-M, LPT53-M, and LPT54-M respectively.

While every precaution has been taken to ensure accuracy and completeness in this manual, EGS Electrical Group, LLC. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

The SolaHD and Emerson logos are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. ©2009 EGS Electrical Group, LLC. All rights reserved. Specifications subject to change without notice.

Mechanical Outline & Dimensions

4.00

[101.6]

3.73

[94.7]

.197 [5.0] minimum

1

3

1

6

M1

M2

GND

Mounting hole

.16 [4.0] 4X

SK1

SK2

Side View

All dimensions are in inches [mm].

Maximum screw diameter is .22″ [5.6 mm].

Mounting holes M1 and M2 should be grounded for

EMI purposes. Mounting hole M1 is an earth ground

connection.

CAUTION! Do not accidentally connect the ac connector

to the dc output.

Top View