ZLP12840 datasheet(12/58 Pages) ZILOG

12 / 58 page

PS024406-0106

P R E L I M I N A R Y

Architectural Overview

ZLP12840 OTP MCU

Product Specification

Architectural Overview

The ZLP12840 OTP MCU is a member of the Crimzon family of infrared microcontrol-

lers. It provides a directly-compatible code upgrade path to other Crimzon MCUs,

offers a robust learning function, and features up to 128 KB one-time-programmable

(OTP) read-only memory (ROM) and 1004 bytes of general-purpose random-access mem-

ory (RAM). Two timers allow the generation of complex signals while performing other

counting operations. A UART allows the ZLP12840 MCU to be a slave/master database

chip. When the UART is not in use, the Baud Rate Generator can be used as a third timer.

Enhanced stop-mode recovery (SMR) features allow the ZLP12840 MCU to awaken from

STOP mode on any change of logic, and on any combination of the 12 SMR inputs. The

SMR source can also be used as an interrupt source.

Many high-end remote control units offer a learning function. Simply stated, a learning

function allows a replacement remote unit to learn most infrared signals from the original

remote unit and regenerate the signal. However, the amplifying circuits of many learning

remotes are expensive, are not tuned well, and result in frustrated users. ZiLOGs

ZLP12840 MCU is the first chip dedicated to solving this problem because it offers a

built-in tuned amplification circuit in a wide range of positions and battery voltages. The

only external component required is a photodiode.

The ZLP12840 MCU greatly reduces system cost, yet improves learning function reliabil-

ity. Best of all, however, will be the user experience promised by ZiLOGs superior learn-

ing function. With all new features, the ZLP12840 MCU is excellent for infrared remote

control and other MCU applications.

Features

Table 1 lists the memory, I/O, and power features of the ZLP12840 one-time-programma-

ble microcontroller. Additional features are listed below the table.

Table 1. ZLP12840 OTP MCU Features

Device

OTP ROM (KB)

RAM* (Bytes)

I/O Lines

Voltage

Range

ZLP12840 MCU

32, 64, 96, 128

1004

24 or 16

2.03.6V

Note: *General-purpose registers implemented as random-access memory.

ZLP12840 bảng dữ liệu(PDF) 12 Page - Zilog, Inc.

ZLP12840 bảng dữ liệu(HTML) 12 Page - Zilog, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

bảng dữ liệu tải về

Link URL