ICS1893BKILF datasheet(86/133 Pages) ICST

tên linh kiện	ICS1893BKILF

Giải thích chi tiết về linh kiện	3.3-V 10Base-T/100Base-TX Integrated PHYceiver

PDF	133 Pages

Scroll/Zoom	100%

nhà sản xuất	ICST [Integrated Circuit Systems]

Trang chủ	http://www.icst.com

Logo

86 / 133 page

ICS1893BF, Rev. C, 9/29/05

September, 2005

Chapter 7 Management Register Set

ICS1893BF Data Sheet - Release

7.13.8 Link Loss Inhibit (bit 18.1)

The Link Loss Inhibit bit allows an STA to prevent the ICS1893BF from dropping the link in 10Base-T mode.

When an STA sets this bit to logic:

• Zero, the state machine behaves normally and the link status is based on the signaling detected Twisted-

Pair Receiver inputs.

• One, the ICS1893BF 10Base-T Link Integrity Test state machine is forced into the ‘Link Passed’ state

regardless of the Twisted-Pair Receiver input conditions.

7.13.9 Squelch Inhibit (bit 18.0)

The Squelch Inhibit bit allows an STA to control the ICS1893BF Squelch Detection in 10Base-T mode.

When an STA sets this bit to logic:

• Zero, before the ICS1893BF can establish a valid link, the ICS1893BF must receive valid 10Base-T

data.

• One, before the ICS1893BF can establish a valid link, the ICS1893BF must receive both valid 10Base-T

data followed by an IDL.

ICS1893BKILF bảng dữ liệu(PDF) 86 Page - Integrated Circuit Systems