DS2792 datasheet(39/40 Pages) MAXIM

39 / 40 page

DS2792 Programmable Fuel Gauge with UART Interface

39 of 40

APPLICATIONS

The low-power, high-performance RISC architecture of the DS2792 makes it an excellent fit for many portable or

battery-powered applications that require cost-effective computing and analog measurement capability. The high-

throughput core is programmable in circuit over the UART and JTAG interfaces, allowing for firmware upgrades

and ease of code development. Applications benefit from UART and GPIO peripheral interfaces allowing the

microcontroller to communicate with many external devices. The DS2792’s high level of integration reduces

component count and board space, critical factors in the design of portable systems.

The DS2792 is ideally suited for applications such as fuel gauging, sensor conditioning, and data collection.

ADDITIONAL DOCUMENTATION

Designers must have four documents to fully use all the features of this device. This data sheet contains pin

descriptions, feature overviews, and electrical specifications. Errata sheets contain deviations from published

specifications. The user’s guides offer detailed information about device features and operation. The following

documents can be downloaded from www.maxim-ic.com/DS2792.

The DS2792 data sheet, which contains electrical/timing specifications and pin descriptions, available at

www.maxim-ic.com/DS2792.

The DS2792 errata sheet, available at www.maxim-ic.com/errata.

The MAXQ Family User's Guide, which contains detailed information on core features and operation, including

programming at www.maxim-ic.com/products/MAXQUG.

The MAXQ Family User's Guide: DS2792 Supplement, which contains detailed information on features specific

to the DS2792 at www.maxim-ic.com/DS2792UG.

DEVELOPMENT AND TECHNICAL SUPPORT

A variety of highly versatile, affordably priced development tools for this microcontroller are available from

Maxim/Dallas Semiconductor and third-party suppliers, including:

Compilers

In-circuit emulators

Integrated development environments (IDEs)

Serial-to-JTAG converters for programming and debugging

USB-to-JTAG converters for programming and debugging

Technical support is available through email at batterymanagement.support@dalsemi.com.

DS2792 bảng dữ liệu(PDF) 39 Page - Maxim Integrated Products