MAX22005 datasheet(4/19 Pages) MAXIM

4 / 19 page

Maxim Integrated │ 4

www.maximintegrated.com

Evaluates: MAX22005

MAX22005 Evaluation Kit

Pmod is a trademark of Digilent, Inc.

Detailed Description of Hardware

The MAX22005EVKIT# provides an easy-to-use and flex-

ible solution for evaluating the MAX22005, 12-channel

factory-calibrated configurable analog-input IC for indus-

trial applications. The MAX22005 EV kit communicates

to a PC through a commonly available A-to-micro-B USB

cable. Since there is no on-board microprocessor, all

coordination and low-level SPI transactions are managed

by code on the PC, as part of the GUI.

For users who prefer more direct control through their own

hardware, important signals are made available through

J201, which offers a 6x2 header with 0.1” spacing that is

sometimes called a Pmod™ header, making it compatible

with many FPGA and microcontrollers systems (refer to

the MAX22005 EV Kit Schematic). As well as indepen-

dent dedicated connection, J201 can also be paired with

the Maxim’s USB2GPIO# control card. If J201 is used,

disconnect the PC interface from the MAX22005 EV kit

by opening all switches on SW1.

For a list of configuration options refer to Table 1.

Figure 2. MAX22005 EV Kit GUI Register Tab

MAX22005 bảng dữ liệu(PDF) 4 Page - Maxim Integrated Products