| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MPXV7007DP bảng dữ liệu(PDF) 4 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
MPXV7007DP bảng dữ liệu(HTML) 4 Page - NXP Semiconductors |
|
4 / 19 page ![]() NXP Semiconductors MPXV7007 Integrated silicon pressure sensor, on-chip signal conditioned, temperature compensated and calibrated 8 Operating characteristics (VS = 5.0 Vdc, TA = 25 °C unless otherwise noted. Decoupling circuit shown in Figure 6 required to meet specification. Characteristic Symbol Min Typ Max Unit Pressure range[1] POP –7 — 7 kPa Supply voltage[2] VS 4.75 5.0 5.25 Vdc Supply current Io — 7.0 10 mAdc Minimum pressure offset[3] (0 °C to 85 °C) @ VS = 5.0 Volts Voff 0.33 0.5 0.67 Vdc Full scale output[4] (0 °C to 85 °C) @ VS = 5.0 Volts VFSO 4.3 4.5 4.7 Vdc Full scale span[5] (0 °C to 85 °C) @ VS = 5.0 Volts VFSS — 4.0 — Vdc Accuracy[6] (0 °C to 85 °C) — — — ±5.0 %VFSS Sensitivity V/P — 286 —- mV/kPa Response time[7] tR — 1.0 —- ms Output source current at full scale output IO+ — 0.1 —- mAdc Warm-up time[8] — — 20 —- ms Offset stability[9] — — ± 0.5 —- %VFSS Table 5. Operating characteristics) [1] 1.0 kPa (kiloPascal) equals 0.145 psi. [2] Device is ratiometric within this specified excitation range. [3] Offset (Voff) is defined as the output voltage at the minimum rated pressure. [4] Full scale output (VFSO) is defined as the output voltage at the maximum or full rated pressure. [5] Full scale span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure. [6] Accuracy (error budget) consists of the following: • Linearity: Output deviation from a straight-line relationship with pressure over the specified pressure range. • Temperature hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied. • Pressure hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum or maximum rated pressure, at 25 °C. • TcSpan: Output deviation over the temperature range of 0 °C to 85 °C, relative to 25 °C. • TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0 °C to 85 °C, relative to 25 °C. • Variation from nominal: The variation from nominal values, for offset or full scale span, as a percent of VFSS, at 25 °C. [7] Response time is defined as the time for the incremental change in the output to go from 10 % to 90 % of its final value when subjected to a specified step change in pressure. [8] Warm-up time is defined as the time required for the product to meet the specified output voltage after the pressure has been stabilized. [9] Offset stability is the output deviation of the product when subjected to 1000 hours of pulsed pressure, temperature cycling with bias test. MPXV7007 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2021. All rights reserved. Product data sheet Rev. 4 — 26 January 2021 4 / 19 |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |