| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AT25FF321A bảng dữ liệu(PDF) 39 Page - Dialog Semiconductor |
|
|
|||||||||||||||||||||||||||||
AT25FF321A bảng dữ liệu(HTML) 39 Page - Dialog Semiconductor |
|
39 / 119 page ![]() Datasheet 2021-08-19 DS-AT25FF321A-181 Revision J 39 © 2021 Dialog Semiconductor AT25FF321A 32-Mbit, 1.65 V - 3.6 V SPI Serial Flash Memory with Multi-I/O Support 5 Status Registers The device contains five Status registers (SR) described in the following subsections. The Status registers can be read to deter- mine the device's ready/busy status, as well as the status of many other functions such as hardware locking and software protection. 5.1 REGISTER STRUCTURE AND UPDATES In the AT25FF321A device there are two sets of Status registers. One set is implemented in hardware and is accessed as Status registers 1 - 5. These are known as volatile registers as they lose their data during a device reset. Also, the device keeps a copy of the Status registers in memory. These are known as non-volatile registers because they are stored in the Flash and are not affected by a device reset. On power up, the non-volatile contents of the memory are copied to the Status registers. See Section 5.2.2 for more information on volatile and non-volatile register types. The AT25FF321A provides two methods for updating the Status Registers. When the Write to Status Register command is preceded by the Volatile Status Register Write Enable (50h) command, only the flip-flops holding the Status register bits are updated; the non-volatile memory dedicated to the Status registers is not updated. When the Write to Status Register command is preceded with a Write Enable (06h) command, then both the flip-flops holding the Status register bits and the non-volatile memory dedicated to the Status registers are updated. This concept is shown in Figure 24. The main difference between these two commands is the time required to execute them. Accesses to memory are much slower by default. So for the 50h command, the write is to the volatile Status registers only which is very fast. For the 06h command, the write is not only to the Status registers, but also to non-volatile memory which is much slower. Figure 24: AT25FF321A Register Structure Status Registers Memory 50h 06h Power Up |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |