AT25DF641A datasheet(37/58 Pages) DIALOG

37 / 58 page

AT25DF641A [DATASHEET]

8793F–DFLASH–11/2017

Table 11-2. Status Register Format – Byte 2

Notes: 1. Only bits 4 and 3 of Status Register Byte 2 will be modified when using the Write Status Register Byte 2 command.

2. R/W = Readable and Writeable

R = Readable only

11.1.1 SPRL Bit

The SPRL bit is used to control whether the Sector Protection Registers can be modified or not. When the SPRL bit is in

the Logical 1 state, all Sector Protection Registers are locked and cannot be modified with the Protect Sector and

Unprotect Sector commands (the device will ignore these commands). In addition, the Global Protect and Global

Unprotect features cannot be performed. Any sectors that are presently protected will remain protected, and any sectors

that are presently unprotected will remain unprotected.

When the SPRL bit is in the Logical 0 state, all Sector Protection Registers are unlocked and can be modified (the

Protect Sector and Unprotect Sector commands, as well as the Global Protect and Global Unprotect features, will be

processed as normal). The SPRL bit defaults to the Logical 0 state after device power-up. The Reset command has no

effect on the SPRL bit.

The SPRL bit can be modified freely whenever the WP pin is deasserted. However, if the WP pin is asserted, then the

SPRL bit may only be changed from a Logical 0 (Sector Protection Registers are unlocked) to a Logical 1 (Sector

Protection Registers are locked). In order to reset the SPRL bit back to a Logical 0 using the Write Status Register

Byte 1 command, the WP pin will have to first be deasserted.

The SPRL bit is the only bit of Status Register Byte 1 that can be user modified via the Write Status Register Byte 1

command.

Bit(1)

Name

Type(2)

Description

RES

Reserved for future use

Reserved for future use.

RES

Reserved for future use

Reserved for future use.

RES

Reserved for future use

Reserved for future use.

RSTE

Reset Enabled

R/W

Reset command is disabled (default).

Reset command is enabled.

SLE

Sector Lockdown Enabled

R/W

Sector Lockdown and Freeze Sector Lockdown State

commands are disabled (default).

Sector Lockdown and Freeze Sector Lockdown State

commands are enabled.

Program Suspend Status

No sectors are program suspended (default).

A sector is program suspended.

Erase Suspend Status

No sectors are erase suspended (default).

A sector is erase suspended.

RDY/BSY

Ready/Busy Status

Device is ready.

Device is busy with an internal operation.

AT25DF641A bảng dữ liệu(PDF) 37 Page - Dialog Semiconductor

AT25DF641A bảng dữ liệu(HTML) 37 Page - Dialog Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

bảng dữ liệu tải về

Link URL