_______________General Description

The MAX194 Evaluation System (MAX194EVC16-DIP)

includes the MAX194 evaluation kit and Maxim’s

68HC16 module. Evaluation software supplied with the

kit demonstrates the use of the MAX194 (or the

MAX195) with Motorola’s high-speed QSPI serial inter-

face. Complete source code is included. The EV sys-

tem requires an IBM PC with a serial port and a 5 1/4"

disk drive.

The stand-alone MAX194 Evaluation Kit (MAX194

EVKIT-DIP) is an assembled and tested PC board that

embodies the standard application circuit. Separate

power, digital, and analog ground planes minimize

noise. Jumpers allow several operating modes. The

board generates its own interface timing signals, or can

be connected to a user-provided serial interface.

____________________________Features

♦ Proven PC Board Layout

♦ Complete Source Code Provided

♦ Shutdown-Mode Evaluation

♦ High-Speed Serial Interface

♦ Convenient Test Points Provided On-Board

♦ Operates from a Single 9V to 15V DC Power

Supply

♦ Evaluates Both the 14-Bit MAX194 and the 16-Bit

MAX195

MAX194 Evaluation System/Evaluation Kit

________________________________________________________________ Maxim Integrated Products

1

PART

TEMP. RANGE

BOARD TYPE

MAX194EVC16-DIP

0°C to +70°C

Through-Hole

______________Ordering Information

___________________________________________________________________EV System

MAX194EVKIT-DIP

0°C to +70°C

Through-Hole

68HC16MODULE

0°C to +70°C

Through-Hole

Note: PC board labeled MAX195 for both MAX194 EV kit and MAX195 EV kit.

68HC16 MODULE

MAX194/MAX195 EV BOARD

19-0349; Rev 1; 3/95

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.