MODEL: SD10

http://www.m-system.co.jp/

SD10 SPECIFICATIONS

ES-6341 Rev.3 Page 4/9

SCALE PLATE

• Type 1: 1.1 Scale Span < 1.3

Number of divisions: 22 to 25.9

Scale: Starts at 0, increments by 0.02 / 0.2 / 2 / 20 /

200. Min. and max. values indicated. 4 digits

including negative sign and decimal point.

Division lines: Long, Short, Medium, Short, Long

(4 divisions repeated)

Minimum

Divisions

Maximum

Divisions

Bipolar

Scale

10

11

8

6

4

2

0

600

400

200

0

-200

-400

0.2

0

-600

0.4

0.6

0.8

1.0

1.2

1.29

■ WHAT MUST BE SPECIFIED WHEN ORDERING

Please specify the bargraph scale range and engineering unit. The overvall scale plate design including the number of

divisions, division line length, character font is determined by M-System.

[Example] : Bargraph range 0 to 300 cm

Bargraph scale range: 0 – 300

Engineering unit for the bargraph: cm

■ TYPES OF DIVISIONS

Five (5) types of divisions are used depending upon the scale span, which determined by the following equation:

where n = integer (used to limit the calculated scale span to the minimum of 1.1, below 11.0.)

The number of divisions is automatically determined by the scale span.

• Type 2: 1.3 Scale Span < 2.0

Number of divisions: 26 to 39.9

Scale: Starts at 0, increments by 0.03 / 0.3 / 3 / 30 /

300. Min. and max. values indicated. 4 digits

including negative sign and decimal point.

Division lines: Long, Short, Medium, Short, Medium,

Short, Long (6 divisions repeated)

Minimum

Divisions

Maximum

Divisions

Bipolar

Scale

0

0.3

0.6

0.9

1.2

1.5

1.8

0.6

0.3

0

-0.3

-0.6

-0.8

0.8

1.99

0

30

60

90

120

130