TECHNICAL DATA SHEET

TE Document:

TTDS-026

Issue:

2

Date:

March 2014

©2014 Tyco Electronics Corporation, a TE Connectivity Ltd. Company

All Rights Reserved

| Indicates Change

Class I Data Classification - See Policy TEC-02-04

Page 1 of 3

Z-Type Markers

Z-Type markers are individual push-on markers used to identify

wires and small cables permanently. The markers are manufactured

using PVC and designed with an expanding profile, enabling each

marker to accommodate a wide range of wire/cable sizes.

Z-Type markers are a simple, cost-effective solution for many

commercial wire identification applications. The markers are supplied

either straight cut or chevron cut. The chevron cut option ensures

the markers remain aligned. Standard Z-Type markers are yellow or

white with black legends and can be supplied as loose pieces

packed in boxes, or on reels. Color coded markers are also

available. Suitable for industrial applications.

KEY FEATURES

TEMPERATURE RATING



Self-extinguishing.

Operating Temperature Range -45°C to 70°C (-40°F to 158°F)



Resistant to key Industrial fluids, including

those used in Mass transit, Aviation and

Military (defined by RW-2535).

ENVIRONMENTAL



Nine sizes covering wire diameters from

1.5mm to 12.7mm (0.06 inches to 0.5

inches).

Information and a downloadable declaration covering RoHS and

REACH compliance can be found at the ‘TE Product Compliance

Support Centre’:

APPLICATIONS

http://www.te.com/en/resources/product-compliance.html



Pre-termination cable identification.

SPECIFICATIONS / APPROVALS



Identification of small wires and cables.

TE Connectivity Standard



Applicator wands available for easy marker

installation.



RW-2535



Electrical and Electronic Equipment,

Industrial

Industrial

PART DESCRIPTION



BS 6746C:1993 Colour chart for insulation and sheath of

electric cables



IEC 60304 Standard Colours for Insulation for Low

Frequency Cables and Wires

0616 1

4

00

Legend code

Color code

Packaging Code

Product size code

Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an

assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2535.