RFFC5071A/2A

WIDEBAND SYNTHESIZER/VCO WITH

INTEGRATED 6 GHz MIXER

Data Sheet Rev. D, August 22, 2019 | Subject to change without notice

11 of 27

www.qorvo.com

®

The modulation frequency is calculated according to the following formula:

Programming Information

The RFFC5071A and RFFC5072A share a common serial interface and control block. Please refer to the Register Maps and

Programming Guide which are available for download from

https://www.qorvo.com/products/d/da000718.

Evaluation Boards

Evaluation boards for RFFC5071A and RFFC5072A are provided as part of a design kit, along with the necessary cables and

programming software tool to enable full evaluation of the device. Design kits can be ordered from www.qorvo.com or from local Qorvo

sales offices and authorized sales channels. For ordering codes please see

“Ordering Information” on page 2.

For further details on how to set up the design kits go to

https://www.qorvo.com/products/d/da000718.

The standard evaluation boards are configured with 3.7 GHz ceramic baluns on the RF ports and wideband transformers on the IF ports.

On the RFFC5071A evaluation board, mixer 1 is configured for down-conversion and mixer 2 is configured for up-conversion. On the

RFFC5072A evaluation board, mixer 2 is configured for down conversion.