PD70101 datasheet(16/36 Pages) MICROCHIP

tên linh kiện	PD70101

Giải thích chi tiết về linh kiện	PD Controller with Switching Regulator for AF/AT/UPOE/ HDBaseT/4-pair PoE Applications

PDF	36 Pages

Scroll/Zoom	100%

nhà sản xuất	MICROCHIP [Microchip Technology]

Trang chủ	http://www.microchip.com

Logo

16 / 36 page

Pin Configuration

The following figure shows the device pin diagram from the top-view.

Figure 3-1. PD70211 Pinout

The following table lists the pin descriptions of the PD70211 device.

Table 3-1. Pin Descriptions

Number

Designator

Description

SUPP_S1

Input pin for sensing the voltage on the diode bridge connected to the data pairs.

This pin along with the SUPP_S2 pin can be used to distinguish between 2-pair and

4-pair operation. (For PSEs that operate in 4 pairs but generates the classification

procedure on only one pair and not on both pairs). Signal is referenced to VPN_IN.

Place a 10k resistor in the input of this pin.

SUPP_S2

Input pin for sensing the voltage on the diode bridge connected to the data pairs.

This pin along with the SUPP_S1 pin can be used to distinguish between 2-pair and

4-pair operation. (For PSEs that operate in 4 pairs but generates the classification

procedure on only one pair and not on both pairs). Signal is referenced to VPN_IN.

Place a 10k resistor in the input of this pin.

PD70211

Pin Configuration

Datasheet

DS00003672A-page 16

PD70101 bảng dữ liệu(PDF) 16 Page - Microchip Technology