DWM1001 Datasheet

© Decawave Ltd 2017

Subject to change without notice

Version 1.5

Page 23

The information below is valid for the DWM1001C module only.

US FCC ID: 2AQ33-DWM1001, Canada ISED/IC: 23794-DWM1001

FCC and ETSI Test reports are available to download at: https://www.decawave.com/product/dwm1001-module

10.1 European Union requirements

10.1.1 Radio Equipment Directive

The DWM1001C Module has been certified for use in European Union countries. A copy of the EU Declaration of

Conformity is available for download on our website.

If these modules are incorporated into a product, the manufacturer must ensure continuing compliance of the

final product to the Radio Equipment Directive 2014/53/EU. The manufacturer must then draw up a new written

EU Declaration of Conformity as per RED Article 18.

Furthermore, the manufacturer must ensure the final product does not exceed the specified power ratings,

antenna specifications, and/or installation requirements as specified in this document. If any of these

specifications are exceeded in the final product, the manufacturer must assess whether additional compliance

testing is required.

IMPORTANT: The “CE” marking must be in compliance with the RED Article 19. It must be affixed to a visible

location on the OEM product. The CE mark shall have a height of at least 5mm except where this is not possible

on account of the nature of the apparatus. The CE marking must be affixed visibly, legibly, and indelibly.