MODEL: R3-PD16B

R3-PD16B SPECIFICATIONS

ES-8390 Rev.5 Page 2/8

http://www.m-system.co.jp/

OUTPUT SPECIFICATIONS

Output: Triac, 16 points

Isolation: Optical isolator

Common: All 16 points (4 terminals)

Common current: Max. 3.2 A per common

Rated load voltage: 100 – 240 V AC

Operational load voltage: 85 – 264 V AC

Maximum load current: 0.4 A per point

Maximum rush current: 6 A for 1 cycle or less time

Maximum leak current at OFF: ≤ 1.5 mA

(200 V AC , 60 Hz)

Maximum voltage drop at ON: ≤ 1.6 V RMS

Other features: Zero-cross function, CR absorber, no fuse

provided

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 200 g (0.44 lb)

PERFORMANCE

Output ON time accuracy:

±10 % for 1 sec. or less setting;

±0.1 sec. for 1 sec. or more setting

Data allocation: 1

Current consumption: 140 mA

Response time: ≤ 0.1 sec. (delay)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(output to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

FUNCTIONS

■OUTPUT HOLD or OUTPUT OFF

In normal conditions, the module outputs the signal from

the preferred bus A.

When an error is detected, the output is switched to the

data from the bus B.

• Output Hold

If both are in error, the module holds the signal and stands

by until one of the communications recovers.

• Output OFF

If both are in error, the module outputs OFF signals and

stands by until one of the communications recovers.

At the startup, it outputs OFF until the communication is

established and normal data is received.