Key Features

Product Overview

Outline Dimensions (

)

inch

mm

The HT-Series wrenches allow for convenient and easy connecting or disconnecting of SMA cable connectors in tight spaces, with

either a wrench or simply finger grip. The use of HT-Series accommodates most SMA cable width diameters.

• Ability to remove SMA connectors without removing the adjacent cables

• Small portable tool, fits in pocket

• Connect or disconnect SMA connectors in tight spaces

• Use in combination with torque wrench or just with fingers

• Protected by US Patent 9,027,447

Outline Drawing

CASE STYLE: MY-1E

How to use the wrench

1. The open box wrench head is slid onto the hex nut as shown in figure-1.

2. The knurled split knobs are rotated to tighten or un-tighten the SMA

cable nut by use of fingers. Alternatively, an open end wrench or a torque

wrench can be used as shown in figure-2.

HT-2-SMA

HT-4-SMA

Model No.

Case Style

Length

wt. grams

HT-2-SMA

MY-1E-004

2.50

13.2

63.50

HT-4-SMA

MY-1E-005

4.00

18.5

101.60

HT-8-SMA

MY-1E-008

8.00

34

203.2

HT-8-SMA

Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

Page 1 of 1

SMA Connectors

REV. D

M175951

HT-SERIES

BT/CP

190917

HT-SERIES

SMA Wrench

Slip over SMA

connector

Channel for Wrench Option

Maximum diameter of cable, 0.200 inches

Open enlarged channel slips over cable

Knurled split knobs for

easy tightening using fingers

Tight Spot