MODEL: DL30

DL30 SPECIFICATIONS

ES-8571 Rev.6 Page 8/11

https://www.m-system.co.jp/

ALARM OUTPUT

MD or DO designated as alarm contact output can be turned

ON at event occurrence.

EVENT REPORTING E-MAIL

DL30 transmits an 'event reporting’ e-mail at occurrence of

event or at designated time.

Encrypted communication supported. (SMTP over SSL).

DL30 turns MD or designated DO ON after transmitting an e-

mail.

Report data attachable to the e-mail.

‘Report Filter’ to filter e-mail destinations by time period of

day.

• No. of e-mail destinations: 64

• No. of event reporting texts: 128

• Channel status: Multiple channels can be selected from AI,

DI, PI, MA, MD, AO, DO, and GDO and attached to an e-mail;.

• Output at transmission failure: 1 point

FTP CLIENT

Logging data file, event data file, and report data file saved

in an SD card can be uploaded to an FTP server.

FTPS protocol allows encrypted communication.

• Transmission timing

Logging data file: when a designated MD is turned ON or

when a new file is created and the previous file is

determined.

Event data file: when a designated MD is turned ON or when

a new file is created and the previous file is determined.

Report data files:

- Daily: on the hour every hour

- Monthly: when the month changes

- Annual: when the year changes

• Output at transmission failure: 1 point

FTP SERVER

Files in an SD card can be read / deleted through an FTP

client.

FTPS protocol allows encrypted communication.

Compatible FTP clients:

• Windows Explorer

• Web browsers

- Internet Explorer version 11

• FFFTP 4.3

I/O MAPPING

Registration of Input-to-Output mapping information allows

multiplex data transmission for remote I/Os and allows DL30

to work as an IP telemeter.

• Allowable I/O combinations:

AI-to-AO; DI-to-AO; MA-to-AO; MD-to-AO; DI-to-DO; MD to

DO; DI to GDO, and MD-to-GDO

USER-DEFINABLE WEB SCREENS

Web browser screens are user-definable.

Use M-System’s user-defined screen designing software

(model: DL30 Web Designer), or any

support tool for editing HTML files, etc. prepared by the

customer.

COMPUTING FUNCTION

• Analog Computing Register (MA)

Capable of addition and subtraction, multiplication, division,

square root, moving average, delay

buffer, exp, common logarithm, natural logarithm, peak

hold (max/min), power, analog

accumulation, F value calculation, scaling, and inverse

logarithm.

• Digital Computing Register (MD)

Capable of logical operation (=, AND, OR, XOR, NOT, RUN).

After detection of an OFF-ON operation of the self-reset

timer MD, the MD is turned OFF when the set time period

has elapsed.

SCHEDULING FUNCTION

Allows schedule outputs for operating DO, MD, or GDO

channels according to scheduled time.

A pattern consisting a group of scheduled outputs for a day

is registered and assigned to a day of the week, allowing

scheduled outputs for the respective days of the week.

Up to 8 schedules per pattern and up to 64 patterns can be

registered.

■ ONE-TIME SCHEDULE ASSIGNMENT

Schedule patterns for one week from the current day can be

set to be applied one time only.

The set schedules can be viewed on a web screen and can

be changed via the web screen or the configurator software

(model: DL30GCFG).

■ PERMANENT SCHEDULE ASSIGNMENT

Schedule patterns which are valid only for specific dates can

be set for up to 10 days.

The set schedules can be viewed on a web screen and can

be changed via the web screen or the configurator software

(model: DL30GCFG).

GDO (GROUPED DIGITAL OUTPUT) CHANNEL FUNCTION

Digital function (MD) and Discrete output (DO) channels can

be grouped into a GDO and defined as a virtual channel.

Operation on a single GDO is effective for all MD and DO

channels registered in the GDO.