HM5451 datasheet(4/11 Pages) HMSEMI

4 / 11 page

______________________________________ ____________________________________________________ __________________________

Over Temperature Protection

*TSHD+

120

Over Temperature Recovery Degree *TSHD-

100

Detection Delay Time

0.25

Overcharge Voltage Detection

Delay Time

tCU

150

240

Overdischarge Voltage Detection

Delay Time

tDL

Overdischarge Current

Detection

Delay Time

tIOV

VDD=3.5V

Load Short-Circuiting Detection

Delay Time

*tSHOR

VDD=3.5V

200

Note: * ---The parameter is guaranteed by design.

Figure 3. Functional Block Diagram

FUNCTIONAL DESCRIPTION

The HM5451 monitors the voltage and

current of a battery and protects it from

being damaged due to overcharge voltage,

overdischarge voltage, overdischarge

current, and short circuit conditions by

disconnecting the battery from the load

or charger. These functions are required in

order to operate the battery cell within

specified limits.

The device requires only one external

capacitor. The MOSFET is integrated and

its RSS(ON) is as low as 45mΩ typical.

Normal operating mode

If no exception condition is detected,

charging and discharging can be carried

out freely. This condition is called the

normal operating mode.

Overcharge Condition

- -

______________________________________ _____________________________________________

_____________________ ___________ _

HM5451 bảng dữ liệu(PDF) 4 Page - Shenzhen Huazhimei Semiconductor Co., Ltd

HM5451 bảng dữ liệu(HTML) 4 Page - Shenzhen Huazhimei Semiconductor Co., Ltd

Html Pages

1 2 3 4 5 6 7 8 9 10 11

bảng dữ liệu tải về

Link URL