MODEL: M6DPA

M6DPA SPECIFICATIONS

ES-7830 Rev.8 Page 1/4

http://www.m-system.co.jp/

Euro Terminal Ultra-Slim Signal Conditioners M6D Series

FREQUENCY TRANSMITTER

Functions & Features

• 5.9-mm wide ultra-slim design

• Low profile allows the M6D module mounted in a 120-mm

deep panel

• Converts the output from a pulse-type transducer into a

standard process signal

• High-density mounting

• Power indicator LED

5.9 (.23)

94

(3.70)

102

(4.02)

mm (inch)

MODEL: M6DPA–[1][2]–R[3]

ORDERING INFORMATION

• Code number: M6DPA-[1][2]-R[3]

Specify a code from below for each [1] through [3].

(e.g. M6DPA-CA-R/UL/Q)

• Frequency range (e.g. 0 – 1 kHz)

• Special output range (For codes Z & 0)

• Specify the specification for option code /Q

(e.g. /C01)

[1] INPUT

A1: Open collector

A2: Mechanical contact

C: 5 V pulse (sensitivity 2 V)

D: 24 V pulse (sensitivity 10 V)

[2] OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 550 Ω max.)

Z: Specify current (See OUTPUT SPECIFICATIONS)

Voltage

4: 0 – 10 V DC (Load resistance 10 kΩ min.)

5: 0 – 5 V DC (Load resistance 5000 Ω min.)

6: 1 – 5 V DC (Load resistance 5000 Ω min.)

4W: -10 – +10 V DC (Load resistance 20 kΩ min.)

5W: -5 – +5 V DC (Load resistance 10 kΩ min.)

0: Specify voltage (See OUTPUT SPECIFICATIONS)

POWER INPUT

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[3] OPTIONS (multiple selections)

Standards & Approvals

blank: CE marking

/UL: UL approval, CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Connection

Input and output: Euro terminal (torque 0.3 N·m)

Power input: Via the Installation Base (model: M6DBS)

or Euro terminal (torque 0.3 N·m)

Housing material: Flame-resistant resin (black)

Isolation: Input to output to power

Zero adjustment: -2 to +2 % (front)

(Output code 4W, 5W: Adjustable at 0V.)

Span adjustment: 98 to 102 % (front)

Chattering protection: Filter provided for mechanical

contact input

Power LED: Green light turns on when the power is supplied.

INPUT SPECIFICATIONS

■ Open Collector

Frequency range: 0 – 0.01 Hz through 100 kHz

Pulse width time requirement: ≥ 4 µsec. for both H and L

levels

Sensing voltage/current: 2.5 V DC @1 mA (approx.)

Detecting levels: ≤ 750 Ω/0.75 V for ON;

≥ 3 kΩ/1.6 V for OFF

■ Mechanical Contact

Frequency range: 0 – 0.01 Hz through 30 Hz

Pulse width time requirement: ≥ 10 msec. for both ON and

OFF