| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LPC55S0X bảng dữ liệu(PDF) 66 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
LPC55S0X bảng dữ liệu(HTML) 66 Page - NXP Semiconductors |
|
66 / 116 page ![]() LPC55S0x/LPC550x All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2020. All rights reserved. Product data sheet Rev. 1.0 — 16 October 2020 66 of 116 NXP Semiconductors LPC55S0x/LPC550x 32-bit ARM Cortex-M33 microcontroller 8. Limiting values [1] The following applies to the limiting values: a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated maximum. b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to VSS unless otherwise noted. c) The limiting values are stress ratings only and operating the part at these values is not recommended and proper operation is not guaranteed. The conditions for functional operation are specified in Table 21. [2] Maximum/minimum voltage above the maximum operating voltage (see Table 21) and below ground that can be applied for a short time (< 10 ms) to a device without leading to irrecoverable failure. Failure includes the loss of reliability and shorter lifetime of the device. [3] Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k series resistor. [4] VDD present or not present. Compliant with the I2C-bus standard. 5.5 V can be applied to this pin when VDD is powered down. [5] Including the voltage on outputs in 3-state mode. [6] An ADC input voltage above 3.6 V can be applied for a short time without leading to immediate, unrecoverable failure. Accumulated exposure to elevated voltages at 4.6 V must be less than 106 s total over the lifetime of the device. Applying an elevated voltage to the ADC inputs for a long time affects the reliability of the device and reduces its lifetime. Table 11. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134).[1] Symbol Parameter Conditions Min Max Unit VDD Main IO supply [2] -0.3 3.96 V VBAT_DCDC Supply of DCDC output stage. DCDC core supply (references and regulation stages) [2] -0.3 3.96 V VBAT_PMU Analog supply [2] -0.3 3.96 V VDD_PMU Analog supply for Core. DCDC output [2] -0.3 1.26 V VDDA Analog supply voltage for ADC [2] -0.3 3.96 V Vrefp ADC positive reference voltage [2] -0.3 3.96 V VI input voltage only valid when the VDD ≥ 1.8 V [5] 0.5 VDD + 0.5 V VI input voltage on I2C open-drain pins 0.5 VDD + 0.5 V VIA analog input voltage on digital pins configured for an analog function [6][7] -0.3 3.96 V IDD total supply current per supply pin (HTQFP64, HVQFN48) - 256 mA ISS total ground current per ground pin (HTQFP64, HVQFN48) - 256 mA Ilatch I/O latch-up current (0.5VDD) < VI < (1.5VDD); Tj < 125 C - 100 mA Tstg storage temperature -65 +150 C VESD electrostatic discharge voltage human body model; all pins [3] 2000 V VESD electrostatic discharge voltage charge device model; all pins [3] 500 V |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |