3M™ Scotch-Weld™ Toughened Epoxy Adhesive LSB60

Technical Information Note

The following technical information and data should be considered representative or typical only and should not be used for speci cation purposes.

Typical Uncured Physical Properties

Property

Values

Notes

Test Condition

Color

Gray

Colors may vary from nearly white to

yellow/amber. Adhesive performance is not

a ected by color variation.

Base Color

White

Accelerator Color

Dark Gray

Base Viscosity

17200 cP

Viscosity measured using Brook eld RTV, spindle

#7, 20 RPM

80°F(27°C)

Accelerator Viscosity

68200 cP

Viscosity measured using Brook eld RTV, spindle

#7, 20 RPM

80°F(27°C)

Base Resin

Epoxy

Accelerator Resin

Amine

Base Net Weight

10 lb/gal

Accelerator Net Weight

9.8 lb/gal

Mix Ratio by Volume (B:A)

1:1

Mix Ratio by Weight (B:A)

1:1

Typical Mixed Physical Properties

Property

Values

Test Condition

Notes

Worklife

90 min

(Nozzle Mixed) @ Room

Temperature

Maximum time that adhesive can remain in a

static mixing nozzle and still be expelled

without undue force on the applicator.

Time to Handling Strength

5 h

Room Temperature

Minimum time required to achieve 50 psi of

overlap shear strength. Cure times are

approximate and depend on adhesive

temperature.

Time to Full Cure

7 day

Room Temperature