section in accordance with the applicable listed system, with a minimum 1/2 in. (12.7mm) overlap onto the adjacent material.

3M Industrial Adhesives

and Tapes Division

3M Center, Building 223-2N-21 St.

Paul, MN 55144-1000 USA

1-800-328-1687

www.3M.com/firestop

Color:

Light Gray

Elongation at Break (ASTM D 412):

600%

Service Temperature Range:

-60°F to 300°F (-51°C to 149°C)

STC (ASTM E 90 and ASTM E 413):

56 when tested in STC 56 rated wall

assembly

Surface Burning (ASTM E 84 Mod):

Flame Spread 0, Smoke Development 0

Hardness (ASTM C 66 Shore A):

20–25 (1000 NS)

10–15 (1003 SL)

Tensile Strength:

85 psi (0.59 MPa)

< 250g/L

Cure: Under typical cure rate conditions of 77°F (25°C) and 50% R.H., sealant becomes

tack-free in about ten minutes, dry-to-touch in 30 to 60 minutes and obtains full-cure

adhesion in 14–21 days. Full cure depends upon abient conditions and volume of sealant.

Typical cure rate is approximately 1/8 inch (3mm) per day.

4. Performance & Typical Physical Properties

5. Packaging, Storage, Shelf Life

Packaging:

Product packaged in cartridge or pail is enclosed in HDPE plastic containers, sausage is packaged in aluminum foil wrap.

Storage:

Shelf Life:

from date of packaging when stored between 40°F and 90°F (4°C and 32°C). Normal stock rotation is recommended.

Lot numbering: First to sixth digit = Date of Production (MMDDYY), Seventh indicator = dash symbol (-), Eighth digit = shift number

6. Installation Techniques

Preparatory Work:

Barrier Water Tight Sealant. Do not use alcohol to clean surfaces in penetration or joint opening, instead use a commercial solvent such as

mineral spirits, xylene, toluene or methyl ethyl ketone (MEK). Ensure that the surface of the substrates are not wet and are frost free. Sealant

can be installed with a standard caulking gun, pneumatic pumping equipment or it can be easily applied with a putty knife or trowel.

Installation Details:

Install the applicable depth of backing material, if required, as detailed within the applicable UL, cUL, ULC, Intertek or other third-party listed

the required depth for the assembly and rating that is specified. Tool within 5 minutes. Clean all tools immediately after use with a commercial

solvent such as mineral spirits, xylene, toluene or methyl ethyl ketone (MEK).

Limitations:

exhibits excellent weatherability when fully cured) or frost-coated, in unvented spaces where sealant is not exposed to atmospheric moisture,

Water Tight Sealants 1000 NS or 1003 SL to polycarbonates or to building materials that bleed oil, plasticizers or solvent (e.g. impregnated

wood, oil-based sealants, or green or partially vulcanized rubber).

Note: In confined cure conditions there may be discoloration of brass, copper or other sensitive metals.

8. Availability

Distributors and Dealers in 10.1 fl. oz. cartridges (12/case), 20.0 oz. sausages (12/case) and 4.5 gallon pails (1/case); light gray-colored sealant. For additional technical

and purchasing information regarding 3M Fire Protection Products, please call: 1-800-328-1687 or visit www.3M.com/firestop.

Consult a 3M Authorized Fire Protection Products Distributor / Dealer or Sales Representative for

Applicable UL, cUL, ULC, Intertek or other third-party drawings and system details.

Important Notice to User:

Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are

reliable, but the accuracy or completeness of such information is not guaranteed.

Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and

control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product,

user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

Warranty

and Limited Remedy: 3M warrants that each 3M Fire Protection Product will be free from defects in material and manufacture for 90 days from the date of purchase from

3M’s authorized distributor. 3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. If a 3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the

purchase price.

Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special,

incidental or consequential, regardless of the legal theory asserted.

3M is a trademark of 3M. Used under license in Canada. LEED is a trademark of U.S. Green Building Council Non-Profit Corporation. The FBC System

Compatible logo indicates that a 3M product has been tested and is monitored on an on going basis to assure chemical compatibility with FlowGuard

Lubrizol Advanced Materials, Inc. © Lubrizol Advanced Materials, Inc. All other trademarks are the property of their respective owners.

Please Recycle. Printed in U.S.A. © 3M 201

8. All rights reserved.