TLE5041plusC

Specification

Note: This information applies especially to narrow pole wheels. Depending on the pole wheel these areas are at

a magnetic air gap of 0.8mm to 2.8mm. At a specific air gap the mounting tolerance in Y-direction can be

between +/- 0.5mm to +/-2mm. This effect is usually observed when using narrow pole wheels, it is

recommended to investigate the magnetic field of every pole wheel used. Air gap and tolerance in Y-direction

are typical application values mentioned here are for information only, without specification character. For

further information and support please contact Infineon.

Data Sheet

20

V 1.2, 2018-01-18