3M

2 of 3

Features

• High quality tapes - for demanding flexible cable application

• Easy installation - simply rebuild the layers of the cable using compatible tapes

• Complete kit – includes tapes that match the cable construction

Applications

For splicing flexible power cable rated from 600 V to 15 kV:

• For in-line splicing

• For power feeder circuits

• For use with standard in-line crimp or parallel (crow’s foot) connectors

• For repair and splicing of mine conduit

Physical and

3M

Electrical

operating temperature of 90°C, and an emergency ov erload rating of 130°C. A splice

Properties

constructed using the 3103 kit is rated up to 15 kV. The current rating of the splice

meets or exceeds the current rating for the cables on which it is installed.

Splice Selection Table

*Cables up to 500 kcmil (250 mm

Typical Dimensions (Installed Splice)

NOTE: Overall splice diameters will vary according to cable type and cable

insulation diameter. Splice diameter may be slightly larger than the cable

diameter, dependant on the amount of mining tape build up.

Typical Physical and Electrical Properties

See individual tape Data Sheets

Specifications

Open Specification

For splicing of flexible power cables rated up to 15 kV, including the following cable

types, flat and round: W, G, W-GC, G-GC, SHD-GC, MPF and MPF-GC.

Kit Number

Voltage Class

Conductor

Size Range

3100

600 V – 2 kV

6 AWG – 1/0 AWG*

(14 – 50 mm

3103

5 – 15 kV

6 AWG – 1 AWG*

(14 – 38 mm

3104

2 kV

6 AWG – 1/0 AWG*

(14 – 50 mm

Kit Number

Typical Length

Inches (cm)

3100 Series

30 (76,2)