Detectable Buried Barricade Tapes 400 Series

Data Sheet

June 2010

Description

Scotch

constructed of a solid aluminum foil backing with a clear film laminate. The aluminum

backing helps make underground assets easier to locate when using a non-ferrous

locator. These tapes are color-coded to meet or exceed the industry standards,

including the American Public Works Association (APWA).

Agency Approvals &

Self Certifications

Meets the requirements of:

RoHS 2002/95/EC

“RoHS Compliant 2002/95/EC” means that the product or part (“Product”) does not contain any of the

substances in excess of the maximum concentration values in EU Directive 2002/95/EC, as amended

by Commission Decision 2002/618/EC, unless the substance is in an application that is exempt under

RoHS. This information represents 3M’s knowledge and belief, which may be based in whole or in part

on information provided by third party suppliers to 3M.

Typical Properties

Not for specifications. Values are typical, not to be considered minimum or maximum.

Properties measured at room temperature 73°F (23°C) unless otherwise stated.

Physical Property (Test Method)

Typical Value

US units (metric)

Color and Width

Variable (see availability chart)

Thickness

5-mil

Length

1000 ft.

Maximum Detectable Burial Range*

2” – 6” to 12”

3” – 12” to 24”

6” – 22” to 30”

Tensile Strength at Break (ASTM D-882)

35 lbs/in (15,000 psi)

* The types of locators used have a direct input on the maximum detectable burial depth.

Specifications

The tape shall be of good manufacturing quality in terms of appearance. It shall

not gap or telescope more than 0.1 inches when stored at temperatures below

49°C. It must be flexible or not be stiff or brittle in applications ranging from below

0°C to about 38°C. The tape must be removable from the roll without difficulty.

The tape shall be smooth, uniform, and free of defects and irregularities. The print

shall be uniform, free of visibly large voids and foreign materials, and the lettering

free of lumps. The warning words shall be legible, correctly spelled and fully

printed. The ink shall be dry, firmly bonded to the substrate, and not transferable to

non-printed parts of the film.

Shelf Life & Storage

This product has a 5-year shelf life from date of manufacture when stored in a

humidity controlled storage (10°C/50°F to 27°C/80°F and <75% relative humidity).

1 of 2

3