Data Sheet S15809EJ1V0DS

9

µµµµ PD16704

4. TIMING CHART (R,/L = H)

As shown in the figure below, when DS = H, scan signals are output successively from two outputs in synchronization

with the rise of CLK (double scan operation).

It is also possible to accelerate the fall timing of one of the scan signals (the output side in normal scan mode) in a

double scan operation by using the DSOE signal. DSOE is input asynchronously to the clock, and the output is fixed to

The DSOE signal is only enabled during a double scan operation.

CLK

OE

DS

DSOE

STV