V16

2

Specifications

CFM201S Series Derating Curve

INPUT SPECIFICATIONS:

AC Input Voltage …....………........….......................................... 90~264Vac

Input current …………………………… 100Vac/3A max., 240Vac/1.5A max.

Frequency ………………………………………….……………..... 47 to 63Hz

Inrush Current …………… Cold Start@25℃ ........... 100A max. @240Vac

EMI …………………………………………………..…… CISPR/FCC Class B

Leakage Current …………………………………………….…..… 3.5mA max.

OUTPUT SPECIFICATIONS:

Isolation ……….....................……… Input to Output = 3000VAC(4,242VDC)

Hold-up Time …………………………………………...… 10ms typ@115Vac

Over Voltage Protection ………………...…… Hiccup mode(Auto Recovery)

Short Circuit Protection ………………..…….. Hiccup mode(Auto Recovery)

Temperature Coefficient …………………………………………… ±0.05％/℃

GENERAL SPECIFICATIONS:

Operating Temperature ................................. -20~80℃ (see derating curve)

Storage Temperature .................................................................... -20~85℃

Over Temperature Protection ………….………………….…. Auto Recovery

Humidity ……………….……………….… 93% RH max. non-condensing

Altitude ………..……………………………………………..………..... 2000m

Cooling ………............................… Natural convection for 150W and forced

air convection(19CFM FAN) for 200W

NOTE:

Switching Frequency ………………………........................ 80~100KHz typ.

1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for

MTBF ……… MIL-HDBK-217F, GB, 25℃/115VAC ……….… 120Khrs typ.

ripple &noise measuring @20MHz BW.

Dimensions

2. Voltage accuracy is set at 60% rated load and 25℃.Ta.

Open frame versions …… 5.000x3.000x1.441 inches (127.00x76.20x36.60mm)

3. Line regulation is measured from high line to low line with rated load.

Covered versions ……...... 5.354x3.465x1.929 inches (136.00x88.00x49.00mm)

4. Load regulation is measured from full to 10% load.

Weight ………………… Open frame versions 400g, Covered versions 500g

5. Typical efficiency at 230 VAC and full load at 25°C.

SAFETY AND EMC:

6. Standard input and output connectors (CN1 and CN2) wafer with

Emission and lmmunity …........ EN55022 Class B, FCC Part15 Class B

TAIWAN KING PIN TERMINAL PVHI series and mate with JST

EN61000-6-3, EN61000-3-2, EN61000-3-3

housing VHR series or equivalent.

EN55024, EN61000-6-1, EN61204-3

7. Optional Input and output connectors (CN1 and CN2) wafer with

Safety ……….………….. IEC60950-1, EN60950-1, UL60950-1 2nd edition

LONG CHU P3060 series and mate with MOLEX housing 5195 series

or equivalent.

8. Output connector CN3(Remote voltage sense) mates with MOLEX

housing 5051 or equivalent.

9. Output connector CN4(Fan output) mates with MOLEX housing 5051

or equivalent.

10. For covered versions add “C” to model number or order part no.

For example CFM201S120 –C, safety approvals do not the covered

assembly, only to the open-frame power supply.