http://www.prewell.com

4

Ultra-linear Mixer

PM210

Products and product information are subject to change without notice. Version 10

Preliminary

Mounting Instructions

1 Use a large ground pad area with many plated through-holes as shown.

2 We recommend 1 oz copper minimum.

3 Measurement for our data sheet was made on 0.8mm thick FR-4 Board.

4 RF trace width depends on the board material and construction.

5 Add mounting screws near the part to fasten the board to a heatsink.

6 Add as much copper as possible to inner and outer layers near the part to ensure optimal thermal performance.

Evaluation Board Layout (40x40 mm)