Ver.1.12

ADA16-8/2(LPCI)L

2

(2/2)

Item

Specification

Digital I/O

Number of input channels

Unisolated input 4ch (TTL level positive logic)

Number of output

channels

Unisolated output 4ch (TTL level positive logic)

Counter

Number of channels

1ch

Counting system

Up count

Max. count

FFFFFFFFh (Binary data,32bit)

Number of external inputs

2 TTL level (Gate/Up)/ch

Gate (High level), Up (Rising edge)

Number of external

outputs

TTL level

Count match output (positive logic, pulse output)

Response frequency

10MHz (Max.)

Common section

I/O address

64 ports

Interruption level

Errors and various factors, One interrupt request line as INTA

Connector

10250-52A2JL[3M]

Power consumption

5VDC 380mA (Max.)

Operating condition

0 - 50

°C, 10 - 90%RH (No condensation)

PCI bus specification

32bit, 33MHz, Universal key shapes supported

*3

Dimension (mm)

121.69 (L) x 63.41 (H)

Weight

60g

*1

The non-linearity error means an error of approximately 0.1% occurs over the maximum

range at 0

°C and 50°C ambient temperature.

*2

At the time of the source use of a signal which built in the high-speed operational

amplifier.

*3

This board requires power supply at +5V from an expansion slot (it does not work on a

machine with a +3.3V power supply alone).

Board Dimensions

Windows version of analog I/O driver API-AIO(WDM)

[Stored on the bundled disk driver library API-PAC(W32)]

The API-AIO(WDM) is the Windows version driver library

software that provides products in the form of Win32 API

functions (DLL).

Various sample programs such as Visual

Basic and Visual C++, etc and diagnostic program *1useful for

checking operation is provided.

For more details on the supported OS, applicable language

and new information, please visit the CONTEC’s Web site.

Linux version of analog I/O driver

API-AIO(LNX)

[Stored on the bundled disk driver library API-PAC(W32)]

The API-AIO(LNX) is the Linux version driver software which

provides device drivers (modules) by shared library and kernel

version.

Various sample programs of gcc are provided.

For more details on the supported OS, applicable language

and new information, please visit the CONTEC’s Web site.

Data Logger Software C-LOGGER

[Stored on the bundled disk driver library API-PAC(W32)]

C-LOGGER is a data logger software program compatible with

our analog I/O products. This program enables the graph

display of recorded signal data, zoom observation, file saving,

and dynamic transfer to the spreadsheet software “Excel”. No

troublesome programming is required.

For more details on the supported OS, applicable language

and new information, please visit the CONTEC’s Web site.

Data Acquisition library for MATLAB ML-DAQ

(Available for downloading (free of charge) from the CONTEC

web site.)

This is the library software which allows you to use our analog

I/O device products on MATLAB by the MathWorks. Each

function is offered in accordance with the interface which is

integrated in MATLAB’s Data Acquisition Toolbox.

For more details on the supported OS, applicable language

and new information, please visit the CONTEC’s Web site.

Data acquisition VI library for LabVIEW

VI-DAQ

(Available for downloading (free of charge) from the CONTEC

web site.)

This is a VI library to use in National Instruments LabVIEW.

VI-DAQ is created with a function form similar to that of

LabVIEW's Data Acquisition VI, allowing you to use various

devices without complicated settings.

For more details on the library and download of VI-DAQ,

please visit the CONTEC’s Web site.

Cable (Option)

Shield Cable with 50-Pin Mini-Ribbon Connectors

at either Ends

: PCB50PS-0.5P (0.5m)

: PCB50PS-1.5P (1.5m)

Shield Cable with 50-Pin Mini-Ribbon Connector at one End

: PCA50PS-0.5P (0.5m)

: PCA50PS-1.5P (1.5m)

Accessories (Option)

Screw Terminal Unit (M3 x 50P)

: EPD-50A *1 *6

Buffer Amplifier Box

for Analog Input Boards (8ch type)

: ATBA-8L *1*3

Buffer Amplifier Box

for Analog Input Boards (16ch type)

: ATBA-16L *1*3

BNC Terminal Unit (for analog input 8ch): ATP-8L *1*5

*1

PCB50PS-0.5P or PCB50PS-1.5P optional cable is required separately.

*3

An external power supply is necessary (optional AC adaptor POA200-20 prepared.)

*5

Capable of using the analog input of up to 8ch, and analog output of up to 2ch.

*6

“Spring-up” type terminal is used to prevent terminal screws from falling off.

*

Check the CONTEC’s Web site for more information on these options.

Board [ADA16-8/2(LPCI)L] …1

First step guide … 1

Disk *1 [API-PAC(W32)] …1

Standard size bracket …1

Warranty Certificate …1

Serial Number Label …1

*1 The bundled disk contains the driver software and User’s Guide

The standard outside dimension(L) is

the distance from the end of the board

to the outer surface of the slot cover.

[mm]

121.69(L)

Cable & Connector

Accessories

Packing List

Support Software