TLP719

2003-09-5

1

TLP719

DIGITAL LOGIC GROUND ISOLATION.

LINE RECEIVER.

MICROPROCESSOR SYSTEM INTERFACES.

SWITCHING POWER SUPPLY FEEDBACK CONTROL.

TRANSISTOR INVERTOR.

The TOSHIBA TLP719 consists of a GaAl As high-output light

emitting diode and a high speed detector.

This unit is 6-lead SDIP. TLP719 is 50% smaller than 8PIN DIP

and has suited the safety standard reinforced insulation class.

So mounting area in safety standard required equipment can be reduced.

TLP719 has a Faraday shield integrated on the photodetector chip provides

an effective common mode noise transient immunity.

So this is suitable for application in noisy environmental condition.

• Open Collector

• Package Type

: SDIP6

• Isolation voltage : 5000 Vrms (Min.)

• Common mode Transient Immunity

: ±10kV/us(Min.) @VCM=400V

@

• TTL Compatible

• Construction Mechanical Rating

7.62 mm pich

standard type

10.16 mm pich

TLPXXXF type

Creepage Distance

Clearance

Insulation Thickness

7.0 mm (Min)

7.0 mm (Min)

0.4 mm (Min)

8.0 mm (Min)

8.0 mm (Min)

0.4 mm (Min)

4.58

9.7±0.3

0.4

1.27

1.25

7.62±0.25

TOSHIBA

Weight: ---g

Unit in mm

Preliminary

PIN CONFIGURATION (Top view)

1:ANODE

2:N.C.

3:CATHODE

4:EMITTER(GND)

5:COLLECTOR(OUTPUT)

SHIELD

1

3

4

5

6

2

SCHEMATIC

connected between pins 4 and 6.

SHIELD

1

3

4

5

6

GND