General

Product code

Connectors

Four RJ-45

EEE standards/network topology

10BASE-T, 100BASE-TX,

1000BASE-T

Wiring

Category-5, unshielded twisted

pair (UTP), 4-pair

Adapter Product Features

Intel® PROSet Utility and Intel® PRO

Intelligent Install for easy installation

•

•

Plug and play specification support

Standard

Auto-negotiation, full-duplex capable

•

•

Integrated media access control (MAC)

and physical layer (PHY)

•

Includes a full-height bracket

•

•

Cable distance

100 m in Category-5 for 100/1000

Mbps; and Category-3 for 10 Mbps

Network Management

Wired for Management (WfM) baseline

v2.0 enabled for servers

•

DMI 2.0 support, Windows Management

Instrumentation (WMI) and

SNMP-manageable SMBus support

•

Remote Installation Services (RIS)

•

Diagnostics (loopback, testability,

PHY register access)

•

Advanced configuration and power

interface (ACPI) 1.0 power management

•

Wake on LAN* support over PCI Express*

PXE 2.0 enabled through boot read-only

memory (ROM)

•

Network Operating Systems (NOS) Software Support

Microsoft Windows* Server 2003,

Enterprise, Datacenter (32- and 64-bit)

•

Microsoft Windows 2000

•

Red Hat Linux* 2.4x or later (32- and 64-bit)

•

FreeBSD 4.x or later

•

Novell Netware*

•

Sun Solaris* x86, OS 8 and later

•

SCO Open Server 5, OpenUNIX 8*

•

Intel Backing

Limited lifetime warranty

•

90-day, money-back guarantee

(U.S. and Canada)

•

Advanced Software Features

Adapter fault tolerance (AFT)

•

Switch fault tolerance (SFT)

•

Adaptive load balancing (ALB)

•

•

•

Teaming support

Scales up to 8 connections

Multiple teams

Supports 4 separate teams,

maximum

IEEE 802.3ad* (link aggregation

•

Test switch configuration

Tested with major switch original

equipment manufacturers (OEMs)

PCIe Hot Plug*/Active peripheral

component interconnect (PCI)

•

EEE 802.1Q* VLANs

•

EEE 802.3* (z, ab, u, x) flow control

support

•

TCP checksum offload — transmission

control protocol (TCP), user datagram

protocol (UDP), Internet protocol (IP)

•

IEEE 802.1p*

•

TCP segmentation/large send offload

•

Interrupt moderation

•

Technical Features

Data rate(s) supported per port

10, 100, and 1000 Mbps

Bus type

PCI Express 1.0a

Bus width

x4 lane PCI Express, operable

in x4, x8, x16 slots

Bus speed (x4, encoded rate)

10 Gbps uni-directional;

20 Gbps bi-directional

EEPROM-SPI and single EEPROM support

•

Interrupt levels

INTA, INTB, INTC, INTD

IEEE support

802.3ab*

Hardware certifications

FCC B, UL, CE, VCCI, BSMI, CTICK, MIC

Controller-processor

Intel® 82571GB

Typical power consumption

12.096 W (12 V @ 1.008 A)

Operating temperature

0–55° C

LEDs

4 (1/port, link and speed) solid

and blinking

Physical Dimensions

Length

16.77 cm (6.601in)

Width

6.89 cm (2.713 in)

Height of end bracket

8.00 cm (3.153 in)

Specifications

The Intel PRO/1000 PT Quad Port LP Server Adapter’s low-profile

design, the industry’s first server adapter to incorporate four

Gigabit Ethernet connections in a low-profile PCI Express slot,

improves server throughput and rack density at the same time.

The Intel PRO/1000 PT Quad Port LP Server Adapter represents

the sixth generation of Intel® network adapters for Gigabit

Ethernet, and features 10/100/1000 Mbps self-configuration

for compatibility with mixed-speed network infrastructure.

For easy installation and management, all Intel® PRO Network

Connections are supported by Intel® PRO Intelligent Install and

the new Intel® PROSet Utility for Windows* Device Manager. Intel

PROSet simplifies adapter installation and gives you point-and-click

power to configure and manage all your Intel PRO Network

Connections for connectivity you can count on.