PD064VT4

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6

Note 5-2 : DENB input signal.

If customer wanted to off the DENB mode , you must keep the DENB (pin 27) always

High or Low.

Note 5-4 , 5-5 : The definitions of U/D & R/L

R/L(PIN 30)= High , U/D(PIN 31)= Low

R/L(PIN 30)= Low , U/D(PIN 31)= High

6. Absolute Maximum Ratings :

The followings are maximum values , which if exceeded, may cause faulty operation or

damage to the unit.

GND=0V, Ta=25℃

Parameters

Symbol

MIN.

MAX.

Unit

Remark

+5V Supply Voltage

-0.3

+7.0

V

Input Signals Voltage

-0.3

V

Note 6-1

Storage Temperature

-30

+70

℃

Operating Temperature

-20

+70

℃

Note 6-2

Note 6-1 : Input signals include CLK , Hsync , Vsync , DENB , R[0:5] , G[0:5] and B[0:5].

Note 6-2 :

Optical characteristics shown in Table 9-1 are measured under Ta=+25℃.

800 tc

DENB

640 tc