KMA310 datasheet(58/71 Pages) NXP

58 / 71 page

NXP Semiconductors

KMA310

Programmable angle sensor IC

KMA310

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3 — 27 February 2019

58 / 71

Classification level for analog mode: A for positive and negative pulses assuming

returning to output voltage level before stress of ±0.9 %VDD within 1 ms otherwise B.

Classification level for digital mode: A for positive and negative pulses assuming a start

of a new SENT frame within 1 ms is allowed otherwise B.

18 Electrostatic discharge

18.1 Human body model (AEC-Q100-002)

The KMA310 is protected up to 8 kV, according to the human body model at 100 pF and

1.5 kΩ. This protection is ensured at all pins and interconnects between package bodies.

Classification level: H3B.

18.2 Human metal model (ANSI/ESD SP5.6-2009)

The KMA310 is protected up to 8 kV, according to the human metal model at 150 pF and

330 Ω inside the ESD gun. This test utilizes waveforms of the IEC 61000-4-2 standard on

component level. Apply the contact discharge in an unsupplied state at pins OUT/DATA

and VDD referred to GND which is connected directly to the ground plane.

Test setup: A.

Test level: 5.

18.3 Machine model (AEC-Q100-003 legacy)

The KMA310 is protected up to 400 V, according to the machine model. This protection is

ensured at all pins and interconnects between package bodies.

Classification level: M4.

All pins of KMA310 have latch-up protection.

18.4 Charged-device model (AEC-Q100-011)

The KMA310 is protected up to 750 V, according to the charged-device model. This

protection is ensured at all pins and interconnects between package bodies.

Classification level: C4.

KMA310 bảng dữ liệu(PDF) 58 Page - NXP Semiconductors