+

±

+

±

V

V

TCR =

2

9

TMP63

www.ti.com

SNIS211C – OCTOBER 2019 – REVISED JUNE 2020

Product Folder Links: TMP63

Submit Documentation Feedback

Copyright © 2019–2020, Texas Instruments Incorporated

8 Detailed Description

8.1 Overview

The TMP63 silicon linear thermistor has a linear positive temperature coefficient (PTC) that results in a uniform

and consistent temperature coefficient resistance (TCR) across a wide operating temperature range. TI uses a

special silicon process where the the doping level and active region areas devices control the key characteristics

(the temperature coefficient resistance (TCR) and nominal resistance (R25)) . The device has an active area and

a substrate due to the polarized terminals. Connect the positive terminal to the highest voltage potential. Connect

the negative terminal to the lowest voltage potential.

Unlike an NTC, which is a purely resistive device, the TMP63 resistance is affected by the current across the

device and the resistance changes when the temperature changes. In a voltage divider circuit, it is recommended

resistance vs temperature table (R-T table) of the TMP63, and subsequently the polynomials as described in the

Design Requirements section. Consult the TMP63 R-T table section for more information.

Equation 1 can help the user approximate the TCR.

where

•

TCR is in ppm/°C

(1)

Key terms and definitions:

•

•

•

•

•

8.2 Functional Block Diagram

Figure 10. Typical Implementation Circuits