| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LCM-40BLE bảng dữ liệu(PDF) 5 Page - Mean Well Enterprises Co., Ltd. |
|
|
|||||||||||||||||||||||||||||
LCM-40BLE bảng dữ liệu(HTML) 5 Page - Mean Well Enterprises Co., Ltd. |
|
5 / 8 page ![]() 65 70 75 80 85 90 95 100 105 55 60 65 70 75 80 85 90 95 220KO 330KO 470KO NTC derating curve 220KΩ 330KΩ 470KΩ Sensed Temperature( ) ℃ TEMPERATURE COMPENSATION OPERATION LCM-40BLE have the built-in temperature compensation function ; by connecting a temperature sensor (NTC resistor) between the +NTC / -NTC terminal of LCM-40BLE and the detecting point on the lighting system or the surrounding environment, output current of LCM-40BLE could be correspondingly changed, based on the sensed temperature, to ensure the long life of LED. ◎ NTC resistance 220K 330K 470K Output Current < 60 , 100% of the rated current (corresponds to the setting current level) ℃ < 70 , 100% of the rated current (corresponds to the setting current level) ℃ < 80 , 100% of the rated current (corresponds to the setting current level) ℃ > 60 , output current begins to reduce, please refer to the curve for details. ℃ > 70 , output current begins to reduce, please refer to the curve for details. ℃ > 80 , output current begins to reduce, please refer to the curve for details. ℃ ◎ Dimming and synchronization function of the driver will be invalid when the "temperature compensation" function is in use. Notes: 1. MEAN WELL does not offer the NTC resistor and all the data above are measured by using THINKING TTC03 series. 2. If other brands of NTC resistor is applied,please check the temperature curve first. ◎ LCM-40BLE can still be operated normally when the NTC resistor is not connected and the value of output current will be the current level selected through the DIP switch. File Name:LCM-40BLE-SPEC 2019-08-13 NTC reference: 40W Multiple-Stage Constant Current Mode LED Driver ‧Synchronization up to 10 drivers (1 master + 9 slaves) Dimming operating range : 10%~100% ‧ ‧Sync cable length : < 5m ‧Sync cable type : Flat cable 2 ‧Sync cable cross section area : 22 – 24 AWG (0.2~0.3mm ) LCM-40 (Slave 2) - - - - - - SYN. SYN. SYN. LCM-40BLE (Master) LCM-40 (Slave 1) SYNCHRONIZATION OPERATION 5m 5m NOTE: 1. Please make sure all units are set to 100% dimming setting (factory default) before synchronizing. 2. Min. Dimming operating range depends on dimmer setting. LCM-40BLE |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |