82830MP datasheet(18/159 Pages) INTEL

18 / 159 page

Intel

® 830MP Chipset

Datasheet

298338-001

Signal Description

This section provides a detailed description of the Intel 82830MP GMCH-M signals. The signals are

arranged in functional groups according to their associated interface.

The “#” symbol at the end of a signal name indicates that the active, or asserted state occurs when the

signal is at a low voltage level. When “#” is not present after the signal name the signal is asserted when

at the high voltage level.

When not otherwise specified, “set” refers to changing a bit to its asserted state (a logical 1). Clear

refers to changing a bit to its negated state (a logical 0). The following notations are used to describe the

signal type:

The following notations are used to describe the signal type:

Input pin

Output pin

I/O

Bi-directional Input/Output pin

s/t/s

Sustained Tristate. This pin is driven to its inactive state prior to tri-stating.

as/t/s

Active Sustained Tristate. This applies to some of the Hub interface signals. This pin

is weekly driven to its last driven value.

The signal description also includes the type of buffer used for the particular signal:

AGTL

Open Drain 1.25V AGTL interface signal. Refer to the AGTL+ I/O Specification for

complete details. AGTL+ signals are “inverted bus” style where a low voltage

represents a logical “1”.

AGP/1.5V

Signals used for AGP or 1.5V interfaces. AGP signals are compatible with AGP 2.0

1.5V Signaling Environment DC and AC Specifications. The buffers are not 3.3V

tolerant.

LVTTL

Low Voltage TTL compatible signals. These are also 3.3V outputs.

CMOS

CMOS buffers.

Note that CPU address and data bus signals are logically inverted signals. In other words, the actual

values are inverted of what appears on the CPU bus. This must be taken into account and the addresses

and data bus signals must be inverted inside the GMCH-M. All CPU control signals follow normal

convention. A 0 indicates an active level (low voltage) if the signal is followed by # symbol and a 1

indicates an active level (high voltage) if the signal has no # suffix.

Table 1 shows the Vtt/Vdd and Vref levels for the various interfaces.

82830MP bảng dữ liệu(PDF) 18 Page - Intel Corporation

82830MP bảng dữ liệu(HTML) 18 Page - Intel Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL