IP3053CX5_CX10_CX15_CX20_1

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2010. All rights reserved.

Product data sheet

Rev. 01 — 3 May 2010

6 of 15

NXP Semiconductors

IP3053CX5/CX10/CX15/CX20

2, 4, 6 and 8-channel passive EMI-filter network with ESD protection

7.2 Crosstalk

The crosstalk measurement configuration of a typical 50

Ω NetWork Analyzer (NWA)

system for evaluation of the IP3053CX5, IP3053CX10, IP3053CX15 and IP3053CX20 is

shown in Figure 8.

Four typical examples of crosstalk measurement results of IP3053CX20 are depicted.

Unused channels are left open.

Fig 8.

Crosstalk measurement configuration

(1) Channel 1 to 2 (pin A1 to C2).

(2) Channel 1 to 4 (pin A1 to C4).

(3) Channel 1 to 6 (pin A1 to C6).

(4) Channel 1 to 8 (pin A1 to C8).

Fig 9.

Measured crosstalk between different channels using the example of IP3053CX20

OUT_2

001aai756

50

Ω

50

Ω

Vgen

DUT

IN_1

OUT_1

IN_2

TEST BOARD

50

Ω

50

Ω

008aaa232

f (MHz)

110

−20

−30

−40

−50

−60

−10

0

(dB)

−70

(1)

(2)

(3)

(4)