TDSUSBF datasheet(23/28 Pages) TEKTRONIX

23 / 28 page

Option

Description

DPOFL-SR-DPHY

MIPI® D-PHY Serial Analysis. Enables analysis of MIPI DSI-1 and CSI-2 buses with analytical tools such as digital views of the

signal, bus views, and packet decoding

DPOFL-SR-EMBD

Embedded Serial Triggering and Analysis (I2C, SPI). Enables triggering on packet-level information on I2C and SPI buses as well

as analytical tools such as digital views of the signal, bus views, and packet decoding

DPOFL-SR-ENET

Ethernet Serial Analysis (10BASE-T and 100BASE-TX) Ethernet Serial Analysis. Enables analysis of Ethernet buses with

analytical tools such as digital views of the signal, bus views, and packet decoding

DPOFL-SR-PCIE

PCI Express Serial Analysis. Enables analysis of PCI Express buses with analytical tools such as digital views of the signal, bus

views, and packet decoding (For models of bandwidth ≥1 GHz only) (Due to large volumes of data, use of standard high-capacity

hard drive rather than the smaller SSD is recommended)

DPOFL-SR-USB

USB 2.0 Serial Triggering and Analysis (LS, FS, HS). Enables triggering on packet-level content for low-speed and full-speed

USB serial buses. Also enables analytical tools such as digital views of the signal, bus views, and packet decoding for low-speed,

full-speed, and high-speed USB serial buses. USB High Speed supported only on ≥1 GHz models

DPOFL-SR-810B

8b/10b Serial Analysis. Enables analysis of 8b/10b buses with analytical tools such as digital views of the signal, bus views, and

packet decoding

DPOFL- ST1G

64-bit NRZ Serial Trigger and 8b/10b Serial Protocol Decode (includes Opt. SR-810B) (For models of bandwidth ≥2.5 GHz only)

DPOFL-SVA

SignalVu® AM/FM/PM Audio Signal Analysis (Requires Opt. SVE)

DPOFL-SVE

SignalVu® Essentials – Vector Signal Analysis Software

DPOFL-SVM

SignalVu® General Purpose Modulation Analysis (Requires Opt. SVE)

DPOFL-SVO

SignalVu® Flexible OFDM Analysis (Requires Opt. SVE)

DPOFL-SVP

SignalVu® Advanced Signal Analysis (including pulse measurements) (Requires Opt. SVE)

DPOFL-SVT

SignalVu® Frequency and Phase Settling Time Measurements (Requires Opt. SVE)

DPOFL-SV23

WLAN 802.11a/b/g measurement application (Requires Opt. SVE) (For models of bandwidth ≥2.5 GHz only)

DPOFL-SV24

WLAN 802.11n measurement application (Requires Opt. SVE and SV23) (For models of bandwidth ≥2.5 GHz only)

DPOFL-SV26

SignalVu® APCO P25 measurements (Requires Opt. SVE)

DPOFL-SV27

SignalVu® Bluetooth Basic LE TX SIG measurements (Requires Opt. SVE) (For models of bandwidth ≥2.5 GHz only)

DPOFL-SV28

SignalVu® LTE Downlink RF measurements (Requires Opt. SVE) (For models of bandwidth ≥1 GHz only)

DPOFL-USB2

USB 2.0 Automated Compliance Test Application (Requires TDSUSBF USB Test Fixture) ≥2 GHz bandwidth required for high-

speed USB.

DPOFL-USBPWR

Automated compliance test solution for USB power adapters

DPOFL-XGBT2

TekExpress Automated 10GBASE-T Compliance Test Software (Requires TF-XGbt Test Fixture) (For DPO7354C model only)

Power plug options

Opt. A0

North America power plug (115 V, 60 Hz)

Opt. A1

Universal Euro power plug (220 V, 50 Hz)

Opt. A2

United Kingdom power plug (240 V, 50 Hz)

Opt. A3

Australia power plug (240 V, 50 Hz)

Opt. A5

Switzerland power plug (220 V, 50 Hz)

Opt. A6

Japan power plug (100 V, 50/60 Hz)

Opt. A10

China power plug (50 Hz)

Opt. A11

India power plug (50 Hz)

Opt. A12

Brazil power plug (60 Hz)

Opt. A99

No power cord

DPO7000C Series Datasheet - DPO7000C Series

TDSUSBF bảng dữ liệu(PDF) 23 Page - TEKTRONIX, INC.

TDSUSBF bảng dữ liệu(HTML) 23 Page - TEKTRONIX, INC.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

bảng dữ liệu tải về

Link URL